PHYSICAL METHODS OF PRODUCTION AND MODIFICATION OF BIOPOLYMER MATRIXES
https://doi.org/10.15825/1995-1191-2009-2-43-46
Abstract
The conditions which are necessary for successful functioning of implants based on polymer matrix having the structure of a chaotic three-dimensional grid are analyzed. The investigation is aimed on the development of techniques for manufacturing the volumetric structured matrixes from polymer biocompatible materials and techniques of implant creation by electro-physical surface treatment of the matrix structure with the purpose of management of their biochemical and biological activity. Morphological characteristics of the matrixes, produced by the method of freeze-drying of the polymeric gel are reported. The complex energy system created for volumetric discharges generation in the structured heterogeneous substances is described.
About the Authors
V. N. Vasilets
Institute of Biomedical Research and Technology, Moscow
Russian Federation
Russian Federation
I. V. Kazbanov
Academician V.I. Shumakov Federal Research Center of Transplantology and Artificial Organs, Moscow
Russian Federation
Russian Federation
S. L. Nedoseev
Russian Research Center «Kurchatov Institute», Moscow
Russian Federation
Russian Federation
V. M. Nistratov
International Institute of Applied Physics and High Technologies, Moscow
Russian Federation
Russian Federation
P. V. Schwartskopf
Moscow Physicotechnical Institute (State University), Dolgoprudny, Moscow region
Russian Federation
Russian Federation
V. I. Sevastianov
Academician V.I. Shumakov Federal Research Center of Transplantology and Artificial Organs, Moscow
Russian Federation
Russian Federation
References
1. Волова Т.Г., Севастьянов В.И., Шишацкая Е.И. Поли- оксиалканоаты – биоразрушаемые полимеры для ме- дицины / Под ред. В.И. Шумакова, 2-е изд., дополн. и переработ. Красноярск: Платина, 2006. 288 с.
2. Долгачев Г.И., Масленников Д.Д., Мижирицкий В.И., Недосеев С.Л. Экспериментальная установка «ЭХО» для модифицирования гетерогенных органических сред совместным действием электрического разряда и элек- тронного пучка // Вопросы атомной науки и техники. Сер. «Термоядерный синтез». 2008. Вып. 1. С. 57–68.
3. Медовщиков С.Ф., Недосеев С.Л. Способ изготовле- ния лайнера для инерциального термоядерного син- теза. Патент РФ No 2075115 от 10.03.1997.
Review
For citations:
Vasilets V.N., Kazbanov I.V., Nedoseev S.L., Nistratov V.M., Schwartskopf P.V., Sevastianov V.I. PHYSICAL METHODS OF PRODUCTION AND MODIFICATION OF BIOPOLYMER MATRIXES. Russian Journal of Transplantology and Artificial Organs. 2009;11(2):43-46. (In Russ.) https://doi.org/10.15825/1995-1191-2009-2-43-46
Views:
759
Email this article 